Today We Change the Cover Gasket on a Mazda MZR 2.3 L Engine! Join our Community of DIY’ers: http://?sub_confirmation=1 Follow us on Facebook for More DIY Goodness: https:// us on Twitter! https://twitter.com/everything_diy Check out our Pictures on Instagram! http://instagram.com/e_diyThis process will also work for the 2.5L and 2.0 L engine as the valve cover design is the same. If you’re seeing a bit of oil seeping from around your valve cover or you’re finding oil around your spark plug threads it’s likely you have a worn out gasket. Luckily a new gasket should only cost $20 and requires no special tools to replace.**This may also work on some Ford Ecoboost and Duratec motors as they’re based off the Mazda MZR motor**Parts: - Felpro VS50639R1 Cover Gasket Set - Permatex Ultra Black Silicone GasketTools Used: - 3/8 Ratchet - 8mm deep socket - 14mm socket - 3/8 Torque Wrench - Hook and Pick Tool - Flat Head Screw Driver - Needle Nose Pliers - Adjustable Wrench The DIY Rep in this Video is Ally!To send letters, products for review/use, other correspondence – please use this address:everythingdiy P.O. Box 186 Pasadena, CA 91102FTC Disclaimer: All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred. ***SAFETY FIRST EVERY TIME***
Copyright © 2019 HAFID INTERNATIONAL LIMITED All rights reserved.